| Managing the Local Video Conference | 44
All participants are displayed on the touch screen.
2.
Tap beside the participant that you want to mute.
The icon becomes . The participant is muted and other participants cannot hear his voice.
Unmuting a Conference Participant
If you are the moderator of a video conference, you can unmute a conference participant. The participants cannot
unmute themselves.
Procedure
1.
On your CP960, tap Members list during a call.
All participants are displayed on the touch screen.
2.
Tap beside the participant that you want to unmute.
The icon becomes . The participant is unmuted and other participants can hear his voice.
Ending the Local Video Conference
If you are the moderator of a video conference, you can end the conference, and then all the participants leave the
conference.
•
Ending the Conference by Remote control
•
Ending the Conference by CP960
Ending the Conference by Remote control
Procedure
1.
On your remote control, press Hang up key.
The monitor prompts whether or not you are sure to end all active calls.
2.
Confirm the action.
Ending the Conference by CP960
Procedure
1.
On your CP960, tap Ending Calls key.
2.
Tap OK.
To Next Page
Loading...
