Yealink VC880 - Muting or Unmuting All Conference Participants; Muting or Unmuting a Conference Participant

| Using Yealink Meeting Server | 67
2.
Select Remove and then press the right key.
3.
Select the desired participant to remove.
Removing Conference Participants by CP960
Procedure
1.
On your CP960, tap Members list during a call.
All participants are displayed on the touch screen.
2.
Tap beside the participant that you want to remove.
Muting or Unmuting All Conference Participants
If you are the organizer/moderator of a YMS video conference, you can mute or unmute all conference participants
except for yourself via CP960. In Training mode conference, the muted participants cannot unmute themselves.
Procedure
1.
During a call, tap Members list on your CP960.
All participants are displayed on the touch screen.
2.
Tap All mute or All unmute to mute/unmute all conference participants.
Muting or Unmuting a Conference Participant
If you are the organizer/moderator of a YMS video conference, you can mute or unmute a conference participant via
CP960. In Training mode conference, the muted participants cannot unmute themselves.
Procedure
1.
During a call, tap Members list on your CP960.
All participants are displayed on the touch screen.
2.
Tap beside the desired participant.
The icon becomes . The participant is muted and other participants cannot hear his voice.
3.
Tap beside the participant that you want to unmute.
The icon becomes . The participant is unmuted and other participants can hear his voice.