Yealink VC880 - Capturing Screenshots by CP960; Capturing Screenshots by Remote Control; Managing Videos and Screenshots

| Using Basic Features | 85
For VC200, make sure the administrator has enabled screenshots feature. And if you need to save the screenshots
locally, local storage should be enabled; if you need to save the screenshots on the USB flash drive, USB feature
should be enabled.
• Make sure that VC200 or USB flash drive has enough storage space.
Note: To save screenshots to a USB flash drive, the USB flash drive you connect should support FAT32 or
NTFS format.
•
Capturing Screenshots by CP960
•
Capturing Screenshots by Remote Control
•
Capturing Screenshots by CP960
Capturing Screenshots by CP960
Procedure
On your CP960, tap More > Screenshot during a conference.
Capturing Screenshots by Remote Control
Procedure
If on your remote control is set as ScreenShot key by your system administrator, press to capture
screenshots.
Capturing Screenshots by CP960
Procedure
1.
In the top-right corner of your CTP20, tap .
2.
Tap Screenshot on host.
Managing Videos and Screenshots
For VC200, the video and screenshot files can be saved to the local storage. You can directly manage them locally.
After the USB flash drive is connected to the VC200/VC500/VC800/VC880/PVT980/PVT950, VCH50 or wired
CTP20, it can be recognized by the VCS codec. You can manage images stored in the Screenshot folder in the .jpg
format and videos stored in the Video Record folder in the .mkv format.
•
Copying the Screenshot from the Local Storage to the USB Flash Drive
•
Copying the Video from the Local Storage to the USB Flash Drive
•
Viewing Screenshots
•
Deleting Screenshots
•
Viewing Local Recorded Videos
•
Deleting Local Recorded Videos