Yealink VC880 - Copying the Screenshot from the Local Storage to the USB Flash Drive; Copying the Video from the Local Storage to the USB Flash Drive; Viewing Screenshots; Deleting Screenshots

| Using Basic Features | 86
Copying the Screenshot from the Local Storage to the USB Flash Drive
For VC200 endpoint, you can copy the screenshot from the local storage to the USB flash drive.
Procedure
1.
For VC200 video conferencing endpoint: on your remote control, go to More > File Manager > Local Storage >
Screenshot.
2.
Select a desired screenshot, and then press the right key to select .
Copying the Video from the Local Storage to the USB Flash Drive
For VC200, you can copy the recorded videos from the local storage to the USB flash drive.
Procedure
1.
For VC200: on your remote control, go to More > File Manager > Local Storage > Video.
2.
Select a desired video, and then press the right key to select .
Viewing Screenshots
Procedure
1.
On your remote control, navigate to More > Recording > Screenshot.
For VC200 video conferencing endpoint: on your remote control, navigate to More > File Manager > Local
Storage/USB flash drive > Screenshot.
2.
Select a desired screenshot, and press OK key or tap beside the desired screenshot and press OK key .
3.
Do one of the following:
• Press the left key or the right key to view the previous or next screenshot.
•
Press or to zoom the screenshot in/out.
•
On your remote control, press to exit.
Deleting Screenshots
If the USB flash drive or local storage space is insufficient, you can delete the screenshots to free up space.
Procedure
1.
On your remote control, navigate to More > Recording > Screenshot.