| Settings | 98
Setting Camera Presets
Camera presets are pre-saved values of the angle and the focal length of the camera with respect to the desired
positions. Camera presets can help you quickly point the camera to a pre-defined location.
•
Storing a Camera Preset
•
Adjusting the Local Camera to a Preset
•
Updating the Stored Preset
•
Editing the Stored Preset
•
Deleting the Stored Preset
•
Clearing up the Stored Preset
Storing a Camera Preset
You can store up to 99 camera presets for the local camera.
•
Adding the Preset by Remote control
Adding the Preset by Remote control
Procedure
1.
Do one of the following when your system is idle:
• For VC880/VC800/VC500/PVT980/PVT950, navigate to More > Preset Location.
•
If you are using remote control, select the local video image and press OK key, and then press .
2.
Select New Preset.
3.
If you connect VCC22 video conferencing camera to your VC880/VC800/PVT980 video conferencing system,
select the desired camera.
4.
Press the navigation key to adjust the angle of the camera or press the / to adjust the focal length.
5.
Press OK key to store the camera preset.
Adjusting the Local Camera to a Preset
You can quickly adjust the position of your camera to a preset.
•
Adjusting the Local Camera to a Preset by Remote Control
Adjusting the Local Camera to a Preset by Remote Control
Procedure
1.
Do one of the following:
• When the system is idle, for VC880/VC800/VC500/PVT980/PVT950, navigate to More > Preset Location.
•
When the system is idle, select a local video image and press OK key, and then press .
• When the system is during a call, press OK key and select Preset Location.
To Next Page
Loading...
