| Configuring Basic Settings | 106
• On your VCS, go to More > Setting > Basic > Date & Time.
On your VP59, tap Setting > Basic > Date & Time.
• On your CTP20, tap Setting > Basic > Date & Time.
2.
Configure and save the following settings:
Parameter Description Configuration Method
Time Format
Configure the time format.
• Hour12
• Hour24
Default: Hour24.
Web user interface
Endpoint
CTP20
Date Format/Date
Configure the date format.
The supported formats are as
below:
• WWW MMM DD
• DD-MMM-YY
• YYYY-MM-DD
• DD/MM/YYYY
• MM/DD/YY
• DD MMM YYYY
• WWW DD MMM
Default: YYYY-MM-DD.
Note:
WWW” represents the
abbreviation of the week;
“DD” represents a two-digit day;
“MMM” represents the first
three letters of the month;
“YYYY” represents a four-digit
year, and “YY” represents a two-
digit year.
Web user interface
Endpoint
CTP20
Setting the Reminder
The system displays a clock on the hour during a call. You can disable it if you do not want to pay attention to time.
This feature is not applicable to VP59.
Procedure
1.
On your web user interface, go to Setting > Date & Time.
2.
Configure and save the following settings:
Parameter Description Configuration Method
Time Reminder
Enable or disable the system
to display a clock on the hour
during a call.
Default: On.
Web user interface
To Next Page
Loading...
