Yealink VS800 - Getting Started; Hardware Overview

| Getting Started | 11
• Yealink PSTN Box CPN10 Quick Start Guide, which describes how to connect VCS codec to PSTN.
• Yealink VCC22 Video Conferencing Camera Quick Start Guide, which describes how to connect the VCC22
video conferencing cameras to VCS codec.
• Yealink CTP20 Quick Start Guide, which describes how to connect CTP20 to the VCS codec.
• Yealink VCM34 Quick Start Guide, which describes how to connect VCM34 to the VCS codec.
You can download these documentations online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
For support or service, please contact your Yealink reseller or go to Yealink Technical Support online:
http://support.yealink.com/?language=zh_cn.
Getting Started
This chapter introduces the basic operation of VCS.
•
Hardware Overview
•
LED Instructions
•
Powering on and off
•
Running the Setup Wizard
Hardware Overview
•
Hardware of VC880 Codec
•
Hardware of PVT980 Codec
•
Hardware of VC800 Codec
•
Hardware of VC500/PVT950 Codec
•
Hardware of VC200 Codec
•
Hardware of VP59 Codec
•
Hardware of VCC22 Video Conferencing Camera
•
Hardware of VCH50 Video Conferencing Hub
•
Hardware of CP960 Conference Phone
•
Introduction of CTP20 Touch Panel
•
Hardware of WPP20 Wireless Presentation Pod
•
Hardware of CPE90 Wired Expansion Microphones
•
Hardware of CPW90-BT Bluetooth Wireless Microphone
•
Hardware of VCR11 Remote Control
•
Hardware of VCM34
•
Hardware of MSpeaker
Hardware of VC880 Codec
With rich physical interfaces for audio and video connection, VC880 can be connected to the 3rd-party camera or
access to the video matrix. In addition, it comes with the professional RCA-in/out interface that integrates the mixer
with the gooseneck microphone. Its spilt-type structure can meet the deployment requirement of the control room
which separates from a large conference room.
The following introduces the corresponding ports on VC880.