| Configuring Video Settings | 135
Configuring HDMI Extended Display by VP59
After you enable the HDMI feature, if you connect a monitor to the phone during a video call, the video images of
the remote party and the shared content are displayed on the monitor, and the call control page is displayed on phone
screen.
Procedure
1.
On your phone, tap Setting > Network & Connection > HDMI.
2.
Enable/disable HDMI.
Selecting the Default Layout for A Single Screen
When only one monitor is connected to the system, you can configure the default layout when a call is established.
About this task
For VP59, if you do not connect a monitor to it, it is single screen by default.
Procedure
1.
On your web user interface, go to Setting > Call Features > Layout > Default Layout.
On your VP59, go to Setting > Call Features > Default Layout.
2.
Configure and save the following settings:
To Next Page
Loading...
