Yealink VS800 - Adjusting Camera Angle and Focus; Adjusting the White Balance; Configuring Auto Exposure Mode

| Configuring Camera Settings | 148
Parameter Description Configuration Method
Hardware version The hardware version of the
camera lens.
Web user interface
Endpoint
CTP20
Adjusting Camera Angle and Focus
You can pan, tilt and zoom your own camera. This feature is not applicable to VP59.
Procedure
1.
Do one of the following:
•
On your web user interface, go to Home > Yourself > .
• On your VCS, select the local video.
• On your CP960 conference phone, tap Camera.
• On your CTP20, tap Camera.
2.
Use the navigation keys to adjust the camera angle.
3.
Click ( ) or ( ) to adjust the focal length.
Adjusting the White Balance
To display the high quality video image, you can adjust the camera white balance. This feature is not applicable to
VP59.
•
Configuring Auto Exposure Mode
•
Configuring Manual Exposure Mode
•
Configuring the Mode of Shutter Priority
•
Configuring Aperture Priority
•
Configuring the Mode of Brightness Priority
•
Configuring the Mode of WDR-Auto
•
Configuring WDR-Manual
Configuring Auto Exposure Mode
Procedure
1.
Do one of the following:
• On your web user interface, go to Setting > Camera > Exposure.
• On your VCS:
For VC880/VC800/VC500/PVT980/PVT950, Go to More > Setting > Camera > Exposure.
On your VC200, go to More > Setting > Video & Audio > Exposure.
• On your CTP20, tap Setting > Camera > Exposure.
2.
Select Manual as the Exposure Mode.
3.
Configure and save the following settings: