Yealink VS800 - Configuring Aperture Priority

| Configuring Camera Settings | 152
Parameter Description Configuration Method
WDR/Wide
Dynamic Range
Specify the WDR. The value represents the
compression degree of the dynamic range.
Cameras with WDR technology can work
perfectly both in the bright and the dark
conditions and present clear images that
balances different lighting, so that you can
identify the details.
• Off-do not use WDR.
• 1~5
Default: 2.
Web user interface
Endpoint
CTP20
Metering
Configure the value of metering.
• Average
• Central
• Bottom
• Top
Default: Average.
Web user interface
Endpoint
CTP20
Configuring Aperture Priority
Procedure
1.
Do one of the following:
• On your web user interface, go to Setting > Camera > Exposure.
• On your VCS:
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera Setting > Exposure.
On your VC200, go to More > Setting > Video & Audio > Exposure.
• On your CTP20, tap Setting > Camera > Exposure.
2.
Select Aperture Priority in Exposure Mode field.
3.
Configure and save the following settings:
Parameter Description Configuration
Method
Aperture
Disable aperture or set the desired value.
Value: F1.6, F2.0, F2.4, F2.8, F3.4,
F4.0, F4.8, F5.6, F6.8, F8, F9.6,
F11, F14 and off
Default: F3.4.
Web user interface
Endpoint
CTP20