Yealink VS800 - Adjusting Graphics

| Configuring Camera Settings | 157
Parameter Description Configuration Method
Color Temperature (it is only
applicable to VC200/VC500/
VC800/VC880)
Configure the value of the color
temperature.
Note: the value is from 2800K
to 6800K. The default value is
the color temperature tested in
the your current environment.
You can set this parameter only
when the white balance mode is
configured to Manual.
Web user interface
Endpoint
Adjusting Graphics
To display the high quality video image, you can adjust camera graphics. This feature is not applicable to VP59.
Procedure
1.
Do one of the following:
• On your web user interface, go to Setting > Camera > Graphic.
• On your VCS:
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera Setting > Graphics.
On your VC200, go to More > Setting > Video & Audio > Graphics.
• On your CTP20, tap Setting > Camera > Graphics.
2.
Configure and save the following settings:
Parameter Description Configuration Method
Display Mode
Configure the display mode of
the camera.
• High Definition
• Standard
• Mild
• Custom
Default: Standard.
Web user interface
Endpoint
CTP20
Saturation
Configure the saturation of the
camera's image.
The saturation means the
maximum intensity of color in
the image.
Note: the value is from 0 to 100.
Default: 50.
Web user interface
Endpoint
CTP20