| Getting Started | 17
Rear Panel of VC500/PVT950 Codec
Port Name Description
①
USB
• Connect to a USB flash drive
Insert a USB flash drive for storing
screenshots, recording videos or
capturing packets. If multiple USB flash
drives are connected, only the latter one
can be identified.
• Connect to an audio input device via an
USB to line input adapter.
• Connect to an audio output device via an
USB to line input adapter.
• Insert a WF50 Wi-Fi USB Dongle
for connecting to Wi-Fi or providing
wireless AP.
• Insert a BT42 Bluetooth USB Dongle
for connecting to the CPW90-BT
Bluetooth wireless microphones.
• Insert a PSTN box CPN10 for
connecting to the PSTN (Public
Switched Telephone Network).
②
VC Hub/Phone
• If you want to use wired sharing to
present, connect this port to the Codec
port on the VCH50 video conferencing
hub.
• If you need an audio device, connect this
port to the Internet port on the CP960
Conference phone.
• Connect to VCM34. (It is not applicable
to PVT950)
③
DC48V Connect to the power source via a power
adapter.
④
HDMI 1 Connect to a monitor for displaying video
images.
To Next Page
Loading...
