Yealink VS800 - Viewing the Wireless Network Status; Forgetting a Wi-Fi

| Configuring Network Settings | 62
3.
If you already enabled wireless AP, select OK to turn it off. The system will automatically search for available
wireless networks in your area.
4.
Select the desired wireless network (SSID) and connect to it.
If the network is secure, enter its password in the Password field, and tap Join to Network.
Connecting to a Hidden Wireless Network
Some wireless networks do not broadcast their SSIDs, which makes them unavailable to find. In order to connect to
one of those networks, you need to connect to one of them manually.
Procedure
1.
Do one of the following:
• On your VCS:
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wi-Fi.
On your VC200, go to More > Network > Wi-Fi.
On your VP59, tap Setting > Network & Connection > Wi-Fi.
• On your CTP20, tap Setting > Advanced > Wired Network > Wireless Network.
2.
Enable Wi-Fi.
3.
If you already enabled wireless AP, select OK to turn it off. The system will automatically search for available
wireless networks in your area.
4.
Select Other.
5.
Enter the name of the wireless network.
6.
Select the desired value from the drop-down menu of Security Mode.
7.
Configure the corresponding parameters.
8.
Select Join to Network.
Viewing the Wireless Network Status
You can view the wireless network status.
Procedure
1.
Do one of the following:
• On your web user interface, go to Network > Wi-Fi > Wi-Fi Status.
• On your VCS:
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wi-Fi > Wi-Fi Status.
On your VC200, go to More > Network > Wi-Fi > Wireless Status.
On your VP59, tap Setting > Network & Connection > Wireless Network > Wireless Status.
• On your CTP20, tap Setting > Advanced > Wired Network > Wireless Network > Wireless Status.
2.
View the detailed wireless network information (for example, SSID or the signal strength).
Forgetting a Wi-Fi
The device will automatically save the Wi-Fi that has been connected ever. To avoid the device connected to a saved
wireless network automatically, you can configure the device not to save a Wi-Fi. Next time you need enter the Wi-Fi
password to connect the Wi-Fi.
Procedure
1.
Do one of the following: