Yealink VS800 - Pexip Cloud Platform

| Configuring Account Settings | 88
Parameter Description Configuration Method
Keep Alive Interval
Configure the interval (in
seconds) that the device sends
keep-alive messages to the SIP
server, so that the SIP server can
remain connected to the device.
Default: 30.
Web user interface
Pexip Cloud Platform
You can register the Pexip account.
When you place a call using the Pexip account, you can:
• Call the device alias to establish a point to point call.
• Call the aliases to join the Virtual Meeting Rooms, Virtual Auditoriums or Virtual Receptions.
• Dial Microsoft Skype for Business/Lync account.
•
Registering a Pexip Account
Registering a Pexip Account
Procedure
1.
Do one of the following:
• On your web user interface, go to Account > VC Platform > Video Conference Platform.
• On your VCS, go to More > Setting > Advanced > Video Conference Platform.
On your VP59, go to Setting > Advanced > Video Conference Platform.
• On your CTP20, go to Setting > Advanced > Video Conference Platform.
2.
Configure and save the following settings:
Parameter Description Configuration Method
Cloud Account
Enables the Cloud feature.
Note: if it is set to Off, your
device cannot register a Pexip
account.
Web user interface
Endpoint
CTP20
Platform Type Select Pexip.
Web user interface
Endpoint
CTP20
Alias
Specify the alias when
registering a Pexip account.
Default: blank.
Web user interface
Endpoint
CTP20
Username
Specify the username for this
Pexip account.
Default: blank.
Web user interface
Endpoint
CTP20