Yealink W52 - Page 49

User Guide for the W52 Cordless Phone
49
3. Press or to highlight the desired line, and then press the Select soft key.
4. Press or to select Enabled from the Status field.
5. Enter the voice mail access code in the Number field.
6. Press the OK soft key to accept the change or the Back soft key to cancel.
To configure fast access for voice mail via the handset:
You can configure fast access to connect straight to the voice mails of the desired line by long pressing the digit
key 1 without having to scroll through the menu when the handset is idle.
1. Press to enter the main menu.
2. Select ->Set Key 1.
The LCD screen displays the lines assigned to the handset as incoming lines and outgoing
lines simultaneously.
3. Press or to highlight the desired line and press the Select soft key.
The radio box of the selected line is marked.
To listen to the voice mail using the menu via the handset:
1. Press to enter the main menu.
2. Select ->Play Message.
The LCD screen displays the lines assigned to the handset as incoming lines and outgoing lines
simultaneously, and the number of voice mails for each line.
3. Press or to highlight the desired line, and then press the Select soft key.
The handset dials out the voice mail access code using the selected line automatically.
4. Follow the voice prompt from the system server to listen to your voice mails.
To listen to the voice mail via fast access via the handset:
1. Long press when the handset is idle.
The handset automatically dials out the voice mail access code using the line you selected
when configuring fast access for voice mail.
2. Follow the voice prompt from the system server to listen to your voice mails.
You can also listen to the voice mail by pressing to enter the Messages & Calls screen. Select the desired
line and press the Select soft key.
Before listening to the voice mails, make sure the voice mail access code has been configured.
When all new voice mails are retrieved, the icon will disappear from the screen.
NOTE:
CALL FEATURES