Basic Operations
25
The name of the handset itself is highlighted and followed by a left arrow.
4. Press or to highlight the desired handset name, and then press the OK soft
key.
The LCD screen prompts “De-register Handset”.
5. Press the Yes soft key to de-register the handset or the No soft key to cancel.
De-register handset via the web user interface at the path:
Status->Handset&VoIP->Delete Handset.
If the handsets have already registered multiple base stations, it will be connected to
the base station automatically. You can select desired base to search for the base
station with the strongest signal strength.
To select the base station via the handset:
1. Press to enter the main menu.
2. Select Settings->Registration->Select Base.
The LCD screen displays all base stations the handset registered to and the
Bestbase option. The radio box of the currently used base station is marked.
3. Press or to highlight the desired base station or the Bestbase option, and
then press the Select soft key.
The handset begins to search for base station. After successful connection, the
handset LCD screen prompts “Base selected successfully!”.
To rename the base station via the handset:
1. Press to enter the main menu.
2. Select Settings->Registration->Select Base.
3. Press or to highlight the desired base station.
4. Press the Rename soft key, and then edit the current name in the Rename field.
You can press to enter special characters and press to switch among
input modes.
5. Press Save soft key to accept the change.
The base station attempts to contact a DHCP server in your network to obtain valid
network settings (e.g., IP address, subnet mask, gateway address and DNS address) by
default.
Static DNS is not normally required when DHCP is enabled on your phone. In some
cases, static DNS may be needed in your environment. Then you can manually
To Next Page
Loading...
