Yealink W56P - Anonymous Call Rejection

Call Features
81
callers. Anonymous call rejection automatically rejects incoming calls from callers who
deliberately block their identities and numbers from showing up. You can configure
anonymous call rejection feature on a per-line basis.
Note
To configure anonymous call rejection feature for a specific line via the handset:
1. Press to enter the main menu.
2. Select Call Features->Anon.Call Rejection.
The LCD screen displays the incoming lines currently assigned to the handset. The
default incoming line is highlighted and followed by a left arrow.
3. Press or to highlight the desired line, and then press the OK soft key.
4. Press or to select the desired value from the Status field.
5. Press the OK soft key to accept the change.
Anonymous Call Rejection Code
You can configure the phone to send anonymous call rejection on code/off code to
activate/deactivate the server-side anonymous call rejection feature via web user
interface. Contact your system administrator for the anonymous call rejection on code
and off code.
To configure anonymous call rejection code via web user interface:
1. Click on Account->Basic.
2. Select the desire account from the Account field.
3. Select desired value from the drop-down list of Anonymous rejection code field.
4. Enter the anonymous call rejection on code and off code in the On Code and Off
Code field respectively.
The anonymous call rejection feature takes effect on the incoming lines that assigned to
the handset. For more information on assigning incoming lines, refer to Incoming Lines on
page 58.
The anonymous call rejection feature is not available on all servers. Contact your system
administrator for more information.