How to use Audio in and Audio out
3/3
1.2 Audio out
Application: MyPBX supports broadcast to all users via audio out port. This
feature is used to broadcast notice. The extension allowed to use this feature
can speak using its IP phone, and what he said will be broadcasted to everyone.
For example, leaders can make an announcement via this feature.
Please follow the steps below to set up external paging for MyPBX:
Step1. Connect MyPBX to a horn/broadcast system through audio out port.
Step2. Edit the External paging groups (default number is 630) on the paging
group page. (PBX Advanced settings Paging Groups)
Step3. Select extension used to paging.
In this example, we select extension 600. When extension 600 dials 630, what
extension 600 said will be played through the audio out port.
Figure 1-4
[Finish]
To Previous Page
Loading...
Need help?
General
