15
EN
liquids or other objects from entering the charging connector.
3.5. ADJUSTING THE STEM HEIGHT
Take care not to catch your ngers
when adjusting the stem height.
1. Pull on the clamp lever (6) to loosen the stem. Then slide the stem up or
down to reach the desired position.
When adjusting the stem, make sure that the pin
engages and disengages from the tube.
2. After adjusting the stem height, press the clamp lever (6) to secure the stem.
Notice: The tension of the clamp lever can be adjusted by tightening or
loosening the two bolts connecting the clamp. Be sure to tighten the clamp
lever to secure the stem.
3.6. PREPARATION
For your own safety, we recommend you use this device in comfortable
conditions, wearing protection equipment such as a helmet and appropriate
protective gear for your joints (knee pads, elbow pads). For your own safety
as well as that of others, drive the scooter wearing closed and preferably
at shoes to ensure you have a good grip and stability.
To Next Page
Loading...
Need help?
General