3 / 8
4.
Operating Instruction
4.1
Mode Declaration
u
Momentary: The relay switches ON by pressing a button on the remote control and will remain ON
until button is released.
u
Latched: Press 1-circuit-channel for 1 time,other channels are OFF
u
Toggle: Press transmitter button for 1 time,the receiver relay is ON,press button again,the receiver
relay if OFF.
u
1/2 channels toggle and 3/4 channels momentary: Press 1/2 channels for 1 time to switch the status,press
3/4 channels will remain ON until the button is released
u
The mode is selected by the hop cap of the controller,as follows:
M short - circuit
S short - circuit
Mode
suspended
suspended
momentary
short - circuited
suspended
latched
suspended short - circuit
toggle
shorted shorted
1/2 channels toggle and 3/4
channels momentary
UP
DOWN
M
S
Controller
DC- DC+
K1 K2
K3
K4
1 2 3 4 5 6 7 8 9
10
11 12
NO
NC
COM
NO
NC
COM
NO
NC
COM
NO
NC
COM
4 / 8
4.2
Operating Instruction
Ψ
Methods and steps for learning
u
Press the learning button on the controller and then release it after LED lamp is lit and the controller
enters into the learning status.After that,press any corresponding button on remote control.If LED
lamp on the controller flashes for 3 times and then is off, it indicates that the learning is success.
Ψ
Methods and steps for clearing code
u
Long press the learning button (more than 5S) until LED lamp is off
4.3
Mobile Control
4.3.1 APP(APPlication) download and installation
Ψ Android
u
u
Domestic users: users can search through the "APP store-360 handset assistant" platform to
search for keywords: "YET" and "Safemate", download the latest version of "safemate" software,
and press the instructions to complete the installation of the APP
Foreign users: users can search through the "Google Play" platform to search for keywords:
"YET" and "Safemate", download the latest version of "safemate" software, and press the
instructions to complete the installation of the APP;
Ψ
iOS system：Users at home and abroad can search through the "APP Store" platform to search
for keywords: "YET", "Safemate", download the latest version of "Safemate" software, and press the
instructions to complete the installation of the APP
Ψ
Users can also download and install the APP by scanning the QR code below.
4.3.2
APP user registration and login
1) Click the registration button on the login page and enter the registration page
Android
IOS
To Next Page
Loading...