Yeti hopper - YETI Hopper Carry Options; Primary Handles

EVA Foam
Bottom
The heavy-duty
EVA Foam Bottom
adds stability and
additional abrasion
resistance.
D-Ring Tie-Down Points
The Hopper™ is equipped with six reinforced D-Ring Tie-Down
Points, on all sides of the cooler. Use these to secure your
Hopper™ to your kayak, ATV, ski, SUP, Radio Flyer, etc.
HitchPoint™ Grid
Accessorize your Hopper™ with the flexibility of the HitchPoint™
Grid. Easily fasten bottle openers, carabiners, key chains, or
accessories such as the YETI SideKick™ Gear Case through
the nylon strapping.
SideKick™ Gear Case (sold separately)
Add storage capacity to the Hopper™ Cooler with the SideKick™
Gear Case. Koozies, wallets, keys, and much more fit into this
handy accessory pouch. The SideKick™ conveniently mounts to
the HitchPoint™ Grid with Velcro strapping.
THREE CARRY OPTIONS
5
1 PRIMARY HANDLES
The primary carry handles
are reinforced at the point of
attachment and double-stitched to
bear the heaviest of loads.
2 END HANDLES
Double-stitched reinforced end
handles serve as both lift points and
zipper pulling anchors.
3 SHOULDER STRAP
The detachable shoulder strap is
designed to make carrying heavy
loads over long distances
more comfortable.
HOPPER™ 30