Need help?Do you have a question about the YitaHome BFTLPT-2008 and is the answer not in the manual?
Steps for installing the toilet flange, ensuring correct angle and securing with bolts and nuts.
Connect the water supply line to the toilet's inlet and check for leaks after flushing.
Connect T-valve to sprayer hose and water supply hose, then connect sprayer head.
Press pedal partway to add water to the bowl, preventing odors before flushing solids.
Press pedal until floor contact for liquids (1-2s) or solids (until rinsed).
Periodically clean mineral deposits by pressing pedal or using a soft brush.
Apply silicone spray or paste lubricant to the flush valve and seal periodically.
Turn off water, disconnect supply line, and drain water from inlet before freezing temperatures.
General| Brand | YitaHome |
|---|---|
| Model | BFTLPT-2008 |
| Category | Toilets |
| Type | One-Piece Toilet |
| Material | Ceramic |
| Flush Type | Dual Flush |
| Installation Type | Floor Mounted |
| Color | White |
| Shape | Elongated |
To Next Page