YOKOGAWA 734 02 User Manual

33
Note
LOGGING-mode operation during HOLD-mode disables HOLD-mode.
To load a Data (SAVE-mode)
1) Press the MEMORY key. (The display shows the “ MEM ”symbol.)
2) Press the READ (5000/ LIGHT*) key.
3) Press the SAVE (HOLD) key to select the number of saved data.
Select the number with the (RANGE) key or (REL /%) key.
4) To cancel the function, hold down the MEMORY key for one second.
(“ MEM ” symbol disappears.)
To load a Data (LOGGING-mode)
1) Press the MEMORY key. (The display shows the “ MEM ”symbol.)
2) Press the READ (5000/ LIGHT*) key.
3) Press the LOG (MIN/MAX) key to select the number of saved data.
Select the number with the (RANGE) key or (REL /%) key.
4) To cancel the function, hold down the MEMORY key for one second.
(“ MEM ” symbol disappears.)
<To delete of saving data>
Delete method (SAVE-mode)
• To delete all data
1) Press the MEMORY key.
(The display shows the “ MEM ”symbol.)
2) Hold down the SAVE (HOLD) key for one second.
(The display shows the “ CLr ”symbol.)
3) Press the SAVE (HOLD) key.
All data is deleted.

YOKOGAWA 734 02 Specifications

General

Brand	YOKOGAWA
Model	734 02
Category	Multimeter
Language	English