2. Transportation, Storage and Installation
2-12
TI 33Q01J10-01E
“Free-access” Floor
Clamp the equipment to pedestals which are anchored to the base floor.
Equipment
Free-access floor
Base floor
Pedestal
F020403.ai
Figure Using Pedestal
In the “free-access” floor, make holes for riser cables to connect to each piece of equipment as
follows:
• If one floor tile is removed, be sure to reinforce the opening with an angle frame for floor
stability.
Free-access floor supports
Angle frame
F020404.ai
Figure Removing One Floor Tile
• Do not make a holes near the floor supports.
• Do not cut away more than 1/3 of a floor tile.
Nov. 20, 2003-00
To Next Page
Loading...
