ii
TI 33J01J10-01EN
3.8.3 l
n A2EXR001 Shunt Resistor Unit [Changing position described]
n
module]
l
l
June 2018 /9th Edition
3.1 Cables and Terminals
n
Mar. 2018 /8th Edition
1.5.1 Examples of Spark-Killer and Diode Installation [Title is changed.]
[Mounting conditions are corrected.]
Example of Mounting N-IO Nodes (Non-Intrinsic Safety Barrier) in a Cabinet
[Mounting conditions are corrected.]
Example of Mounting N-IO Nodes (Intrinsic Safety Barrier) in a Cabinet
[Mounting conditions are corrected.]
3.7.3 n A2SDV505, n A2SDV506, n A2SMX802, [Errors in writing are corrected]
Jan. 2018 /7th Edition
- N-IO product A2EXR001 was added.
1. System Installation Requirements
2. Transportation, Storage and Installation
2.5 Installation
Example of Mounting N-IO Nodes (Non-Intrinsic Safety Barrier) in a Cabinet [A2EXR001 was
added]
CP41]
3. Cabling
3.7.2 Base Plate for Adaptor
Connecting Signal Cables with A2BN3D [A2EXR001 was added]
3.7.3 Adaptor (for A2BN3D)
A2SAP105 Pulse Input Signal Adaptor [A2EXR001 was added]
added]
3.8.3 Adaptor (for A2BA3D)
A2SAP105 Pulse Input Signal Adaptor [A2EXR001 was added]
3.9 Connecting Bus Cable
June 2017/6th Edition
1. System Installation Requirements
n
l Safety Standards [CSA standard number was added]
l
n
Mar. 29, 2019-00
To Next Page
Loading...
