<5. Functions of CQ1 Software> 5-99
IM 80J01A01-01E
Color
“Same” is to display all wells on a chart in the same color.
“Each” is to color wells in different colors by each well.
Heat Min Color
Select the color for low density area in a chart.
Heat Max Color
Select the color for high density area in a chart.
Detail
Dialog to select display range of X-axis and Y-axis is shown, in
which Min. and Max. display range and interval of X and Y axis
can be set. Logarithmic scale is selectable for each axis. If
enormously small value compared to axis size is set for Interval X
or Interval Y, the value isn’t applied.
Object Name
Select object detect name to plot.
X Axis
Set the specified measurement value on X axis
Y Axis
Set the specified measurement value on Y axis
To Next Page
Loading...
