YOKOGAWA CQ1 - Page 202

5-106 <5. Functions of CQ1 Software>
IM 80J01A01-01E
5.6.5 WellTable Window
In “WellTable” window, it is able to select wells to be shown at
ThumbnailChart 1, ThumbnailChart 2 and ThumbnailChart 3 (2), and to
select the statistic of feature data of each well (3).
(1) T
Set time point to display.
(2) Select Display Range
Wells become selectable by left button dragging when this button
becomes (green) by clicking. By right button, wells are
unselected. Wells become yellow during selecting. Color of wells
are designated automatically after selecting.
(3) Thumbnail Chart Selection
By checking [Thumbnail Chart 1] checkbox, the chart of selected
wells will be shown at “ThumbnailChart1” window, and so are the
same with [Thumbnail Chart 2] and [Thumbnail Chart 3].
(2)
(1)
(3)
(4)
Before well selection (heat map)
During well selection
After well selection
(colors are designated automatically)