4-16 <4. Measurement Procedures>
IM 80J01A01-01E
Click “Rec” button in case of restarting measurement.
(It takes about 2 minutes that “Rec” button becomes available after
turning power switch ON.)
Note
In case that starting time of the next timepoint comes during the pausing time,
measurement starts again as following sequence.
Interval
Interval Interval Interval Interval
Interval Interval Interval Interval
Interval Interval Interval
Measuring
<Timepoint>
Interrupting
No interrupting
Interrupting time
is in interval
Interrupting time
is over interval
In case of the time-lapse measurement that pause for filling water and others is
supporsed, it is recommended to set interval so that time span from finishing
measurement of the timepoint to starting of next timepoint become longer than 10
minutes.
To Next Page
Loading...
