4-46 <4. Measurement Procedures>
IM 80J01A01-01E
In case of pausing measurement, click “Pause” button.
In case of re-starting measurement during pausing, click “Stop” button.
In case of stopping, click “Stop” button.
Acquired images are displayed in “ImageViewer” and statistic of feature
data (default is “Count”) of wells which measurement is finished are
displayed in “WellTable” during measurement.
After measurement, switch to “HDD” mode and select (double click) the
result measured above.
Statistics of
feature data
To Next Page
Loading...
