9-2
IM CW120-E
● Measurement Procedure
1. Perform safety checks
with reference to Chapter 3, “Precautions for Safe Measurement.”
2. Turn on the power to CW120/121
with reference to Chapter 4, “Connecting Power Supply and Turning
Power On/Off.”
3. Perform wiring
with reference to Chapter 5, “Wiring.”
4. Set the ranges and wiring method
with reference to Chapter 6, “Setting Ranges and Wiring Method.”
5. Set measurement conditions
with reference to Chapter 7, “Making Settings.”
6. Call the measurement screen
with reference to Chapter 8, “Instantaneous Value Measurement.”
7. Measure the electric energy (watt-hours).
NOTE
During integration (continuous measurement) or standby for integration, no settings can be
modified but they can be viewed by pressing the key for checking.
9.1 Measuring Electric Energy
To Next Page
Loading...
