YOKOGAWA CW120 - Inserting and Removing PC Card

10-2
IM CW120-E
10.2 Inserting and Removing PC Card
How to Insert a PC Card
To the PC card slot on the side of the CW120/121, insert a PC card with its
front side up and in the direction of the arrow on top.
PC card eject button
Front side of flash ATA card
How to Remove a PC Card
Depress the eject button next to the card slot.
The eject button may be one of two positions: depressed and popped-out.
(The figure above shows the depressed position.)
Drawn position: Depressing the button unlocks the card. Pull to remove
the card.
Depressed position: Depressing the button changes the position to the
popped-out position. Depress the button again to
unlock the card, and then pull to remove the card.
NOTE
• Removing the PC card during access to it may destroy the saved files and damage the card
itself. Before removing the card, ensure that:
• Continuous measurement is not in progress.
• Access to the card is not in progress (the mark is not flashing).
• For details of handling the card, see the documentation supplied with the card.
• When transporting the CW120/121, remove the PC card from the slot.