YOKOGAWA CW120 - Formatting PC Card

10-4
IM CW120-E
10.4 Formatting PC Card
The CW120/121 can format a PC card in MS-DOS format. Format the card
before using a newly purchased card, or to erase all files in the card.
Formatting a PC Card with CW120
(1) Insert the PC card in the slot.
(2) When the measurement screen is displayed, press the
key to call
the setting item selection screen.
(3) Select
(i.e., make the mark appear).
(4) Press the
key. flashes on the screen.
(5) Using the
keys, select .
Data Deletion Screen Formatting Screen
(6) Press the key.
(7) The
mark flashes, indicating that access to the PC card is in
progress. When the mark stops flashing and disappears, the formatting
has finished.
(8) To return to the measurement screen, press the key.
SEE ALSO
For details of the respective settings, see Section 7.2.3, “Deleting Measured-data Files and Formatting
PC Card,” in Chapter 7, “Making Settings.”