10-6
IM CW120-E
● Saving and Loading Settings
Saving Settings
Select in the setting item selection screen, select , specify the
file number, and then perform saving.
File name: WTHxxx.SET
File number from 000 to 029
Loading Settings
Select in the setting item selection screen, select , specify the
file number of one of the setting files saved in the PC card, and then perform
loading.
File name: WTHxxx.SET
File number from 000 to 029
SEE ALSO
For details of the respective settings, see Section 7.2.2, “Loading and Saving Settings,” in Chapter 7,
“Making Settings.”
● Copying Data from Backup Memory
When data is saved during electric energy measurement, if the PC card
becomes full or if the card is removed, the measured data is saved to the
backup memory. This data contained in the backup memory can be copied to
a PC card.
SEE ALSO
For details of how to copy data from the backup memory, see Section 7.2.5, “Copying and Clearing
Backup Memory Contents.”
10.5 Saving and Loading from/to PC Card
To Next Page
Loading...
