12-3
IM CW120-E
Auxiliary Functions
12
12.2 Using Optional Printer
Connecting an optional printer allows you to print measured data and
settings. The printer can be connected only to a model with the RS-232
interface.
● Printer Specification
Model: Yokogawa M&C 97010 (Seiko Instruments DPU-414 printer)
Specifications:
Printing method: Thermal serial dot printing
Number of columns to print: 80
Character presentation: 9x7 dots
Print speed: 52.5 mm/s
Paper width: 112 mm
● Connection
Use the RS-232 port.
Printer cable: Model 91010
1.Turn off the power to the printer. (The power lamp turns off.)
2.Connect the printer to the CW120/121 as shown in the figure below.
Printer
Serial port of printer (9 pins)
Power switch
Printer cable (91010)
Online switch
To Next Page
Loading...
