YOKOGAWA CW120 - Page 145

12-5
IM CW120-E
Auxiliary Functions
12
TIP
•For details of how to change the printer settings, see the documentation supplied with the printer.
• If the characters printed with the print mode selection in DIP SW-2 set to 80 columns (OFF) are too
small to read, change the setting to 40 columns (ON).
● Setting in CW120/121
When using a printer, a setting needs to be made also in the CW120/121.
Procedure
With reference to Section 7.2.11, “Selecting Communication Device,” in
Chapter 7, “Making Settings,” select a printer as the communication device.
Either a printer or personal computer can be connected via the RS-232
interface; select a printer when connecting to a printer.
Selecting a Printer
Selecting a Personal Computer
ENTER
ESC
MEAS/SET
DISP
MEAS/SET key
UP/DOWN/LEFT/RIGHT keys
ENTER key
ESC key
The mark flashes on the screen during access to the printer.
12.2 Using Optional Printer