YOKOGAWA CW120 - Page 171

App 2-9
IM CW120-E
Communication Commands
App
1.6 Communication Commands
Command Description
COMMunicate Group
:COMMunicate? Queries all the communication settings
:COMMunicate:HEADer Sets/queries whether or not the header is returned in response to
a query
:COMMunicate:STATus? Queries status specific to the line
:COMMunicate:VERBose Sets/queries whether the response to a query is returned in full or
abbreviated form
SYSTem Group
:SYSTem? Queries all the system settings
:SYSTem:BACKlight Sets/queries whether the LCD backlight is set to ON or OFF
:SYSTem:CLAMp Sets/queries the type of clamp
:SYSTem:CURRent? Queries all the settings relating to the current range
:SYSTem:CURRent:RANGe Sets/queries the current range settings
:SYSTem:DATE Sets/queries the date
:SYSTem:DISPlay? Queries the type of screen
:SYSTem:KLOCK Sets/queries the keylock function
:SYSTem:RESEt Resets the system
:SYSTem:SCALing? Queries all the settings relating to scaling
:SYSTem:SCALing:CT Sets/queries the CT ratio
:SYSTem:SCALing:VT Sets/queries the VT ratio
:SYSTem:TIME Sets/queries the time
:SYSTem:VOLTage? Queries all the settings relating to the voltage range
:SYSTem:VOLTage:RANGe Sets/queries the voltage range
:SYSTem:WIRIng Sets/queries the wiring
INTEGrate Group
:INTEgrate? Queries all the settings relating to electric energy measurement
:INTEgrate:CLEAr Clears integrated values to zero
:INTEgrate:DISPlay? Queries all the settings relating to measurement screen
:INTEgrate:DISPlay:MODE Sets/queries the mode of measurement screen
:INTEgrate:STARt? Queries all the settings relating to the start of measurement
:INTEgrate:STARt:EXECute Starts measurement
:INTEgrate:STARt:METHod Sets/queries the method for starting measurement
:INTEgrate:STARt:TIME Sets/queries the starting time of measurement
:INTEgrate:STATe? Queries the measurement status
:INTEgrate:STOP? Queries all the settings relating to the end of measurement
:INTEgrate:STOP:EXECute Stops measurement
:INTEgrate:STOP:TIME Sets/queries the ending time of measurement
:INTEgrate:STORe? Queries all the settings relating to the data output, file name, and
output interval
:INTEgrate:STORe:STATe Sets/queries whether data output is set to ON or OFF
:INTEgrate:STORe:FILEname Sets/queries the name of a file to be saved
:INTEgrate:STORe:INTErval Sets/queries the output interval
Appendix 2. Communication Commands