YOKOGAWA CW120 - Page 178

App 2-16
Appendix 2. Communication Commands
IM CW120-E
:INTEgrate:STOP:TIME
Function Sets/queries the ending time of
measurement.
Syntax :INTEgrate:STOP:TIME?
:INTEgrate:STOP:TIME
{<NRf1>, <NRf2>, <NRf3>,
<NRf4>, <NRf5>}
<NRf1> = Year: 2000 to 2099
<NRf2> = Month: 1 to 12
<NRf3> = Day: 1 to 31
<NRf4> = Hour: 0 to 23
<NRf5> = Minute: 0 to 59
:INTEgrate:STORe?
Function Queries all the settings relating to
output destination and data items to
be saved.
Syntax :INTEgrate:STORe?
:INTEgrate:STORe:STATe
Function Sets/queries whether data output is
set to ON or OFF.
Syntax :INTEgrate:STORe:STATe?
:INTEgrate:STORe:STATe
{<Boolean>}
:INTEgrate:STORe:FILEname
Function Sets/queries the name of a file to be
saved.
Syntax :INTEgrate:STORe:FILE?
:INTEgrate:STORe:FILE
<Filename>
<Filename> = Up to 8 characters
:INTEgrate:STORe:INTErval
Function Sets/queries the output time
interval.
Syntax :INTEgrate:STORe:INTErval?
:INTEgrate:STORe:INTErval
{<NRf1>, <NRf2>}
<NRf1> = Hour: 0 to 1000
<NRf2> = Minute: 0 to 59
<NRf3> = Second: 0 to 59
Remarks The valid setting is 1, 2, 5, 10, 15,
30 seconds, or 1, 2, 5, 10, 15, 30
minutes, or 1 hour.
:INTEgrate:WH?
Function Queries all the settings relating to
the display digits and unit of electric
energy.
Syntax :INTEgrate:WH?
:INTEgrate:WH:DIGIt
Function Sets/queries the display digits of
electric energy.
Syntax :INTEgrate:WH:DIGIt?
:INTEgrate:WH:DIGIt
{<NRf>}
<NRf> = 0: Standard
1: 000.000
2: 0000.00
3: 00000.0
4: 000000
:INTEgrate:WH:UNIT
Function Sets/queries the display unit of
electric energy.
Syntax :INTEgrate:WH:UNIT?
:INTEgrate:WH:UNIT {<NRf>}
<NRf> = 0: Wh
1: kWh
2: MWh
3: GWh