YOKOGAWA CW120 - Measure Group; Status Group

App 2-17
IM CW120-E
Communication Commands
App
Appendix 2. Communication Commands
1.7.4 MEASure Group
The commands in the MEASure group set or
query parameters relating to data acquisition in
each measurement mode.
:MEASure:INTEgrate?
Function Queries all the settings relating to
the communication output data on
electric energy measurement.
Syntax :MEASure:INTEgrate?
:MEASure:INTEgrate:ITEM?
Function Queries all the settings for data
items of communication output data
on electric energy measurement.
Syntax :MEASure:INTEgrate:ITEM?
:MEASure:INTEgrate:ITEM:<measured data
items>
Function Sets/queries the ON/OFF statuses
for data items of communication
output data on electric energy
measurement.
Syntax :MEASure:INTEgrate:ITEM
:<Measured data items>
<Measured data items> =
0: V1 1: V2 2: V3
3: I1 4: I2 5: I3
6: P 7: Q 8: PF
9: F 10: +Wh 11: -Wh
:MEASure:INTEgrate:ITEM:ALL
Function Sets all effective data items of
communication output data on
electric energy measurement to ON.
Syntax :MEASure:INTEgrate:ITEM
:ALL
:MEASure:INTEgrate:ITEM:CLEAr
Function Resets all effective data items of
communication output data on
electric energy measurement to
OFF.
Syntax :MEASure:INTEgrate:ITEM
:CLEAr
:MEASure:INTEgrate:ITEM:VALUe?
Function Queries the measured values of the
data items that were set to ON
using the :MEASure:INTEgrate
:ITEM:<items>, :MEASure
:INTEgrate:ITEM:ALL, and
:MEASure:INTEgrate:ITEM:CLEAr
commands.
Syntax :MEASure:INTEgrate:ITEM
:VALUe?
1.7.5 STATus Group
:STATus?
Function Queries all the settings relating to
the status of the communication
function.
Syntax :STATus?
:STATus:ERRor?
Function Queries the error code and
message (head of the error queue).
Syntax :STATus:ERRor?
Description • If there is no error, ' 0, "No error" '
is returned.
• You can set whether or not to add
the message contents using the
"STATus:QMESsage" command.
:STATus:OMESsage
Function Sets/queries whether or not to add
the message contents to the
STATus:ERRor? response.
Syntax
:STATus:OMESsage {<Boolean>}
:STATus:OMESsage?