YOKOGAWA CW120 - Page 46

5-8
IM CW120-E
● Carrying out Wiring Check
(1) When the measurement screen is displayed, press the
key for at
least three seconds, and “
” appears on the screen and flashes.
Press WIRING key for
at least three seconds.
START&STOP key
WIRING
START
&STOP
(2) Press the key. Then, “ ” stops flashing and the wiring check
begins.
(3) When no error has been found, “
” is displayed on both the upper
and lower rows. Press the
key to return to the measurement screen.
Upper: Judgment of current inputs
Lower: Judgment of voltage inputs
WIRING key
When no error
WIRING
START
&STOP
START&STOP key
5.5 Wiring Check Function