YOKOGAWA CW120 - Page 56

6-8
IM CW120-E
When the 96033 clamp-on probe is selected for use
5 A 10 A 20 A 50 A
Default: 5 A
When the 96031 clamp-on probe is selected for use
50 A 100 A 200 A 500 A
Default: 50 A
When the 96032 clamp-on probe is selected for use
200 A 500 A 1000 A
Default: 200 A
● Selecting Clamp-on Current Probe to Be Used
The current ranges that can be selected vary with the clamp-on current
probe used. The probe selection can be changed from a setting screen.
Clamp-on Current Probe Models and Ratings
Clamp-on Current Probe Model
96033
96030
96031
96032
Setting
50 A
200 A
500 A
1000 A
Rating (Ranges)
5/10/20/50 A
20/50/100/200 A
50/100/200/500 A
200/500/1000 A
Default: 200 A
Procedure to Change Probe Selection
(1) Press the key when the measurement screen is displayed. The
screen switches to the setting item selection screen and the
sign
appears in the lower left of the screen.
(2) Using the keys, make the mark (in the lower right) and its
current setting appear on the screen. Then, press the
key. The
number representing the currently selected clamp model flashes.
6.3 Changing Current Range Setting