7-14
IM CW120-E
7.2.8 Setting Integration Start Date and Time ( )
Description
There are three ways to start integration:
• Automatic starting at the specified time on the specified date
• Manual starting by pressing the
key for one second or more
• Remote starting by inputting a signal at the external control terminals
The following describes the start date and time setting for the first way.
Procedure
(1) Using the keys in the setting item selection screen, make the
mark and the current settings of the start date and time appear on
the screen. Then, press the
key.
The day setting flashes.
DISP
ENTER
MEAS/SET
ESC
MEAS/SET key
UP/DOWN/LEFT/RIGHT keys
ENTER key
Integration Start Date and Time Change Screen
ESC key
Hour:minute:second
Year, month, and day
(2) Using the keys, select an item — year, month, day, hour, minute, or
second — you want to change where the year, month, and day are shown
with superscripts y, m, and d to avoid confusion. The selected item
flashes.
(3) Using the keys, change the value of the selected item. When
changing a number, pressing the
key continuously will make quick
changes.
7.2 Setting Each Item
To Next Page
Loading...
