7-15
IM CW120-E
Making Settings
7
(4) After making all necessary changes, press the key. The start date
and time settings are changed and the setting item selection screen
returns.
To cancel the changes, press the
key. The setting item selection
screen also returns.
NOTE
Set a valid date and time.
• If the start date and time are set to before the current time, or if the specified start date and
time has passed before a start after setting, integration will start at the appropriate time deter-
mined by the output interval.
• If the start date and time are set to the same as the stop date and time or to later than the stop
date and time, the stop date and time are automatically set to the point after the output interval
from the start date and time.
• Resetting the system changes the integration start date and time to the current time.
TIP
For the year, set the last two digits. The range of the year setting is 00 to 99 (years 2000 to 2099).
SEE ALSO
For details of the start and stop of integration, see Section 9.2, “Starting and Stopping Integration.”
7.2 Setting Each Item
To Next Page
Loading...
