YOKOGAWA CW120 - Page 90

7-30
IM CW120-E
When Setting Decimal Point Position Specifically
ENTER
ESC
MEAS/SET
DISP
MEAS/SET key
Move the decimal point using
the UP/DOWN/LEFT/RIGHT keys.
ENTER key
UP/DOWN/LEFT/RIGHT keys
ESC key
Setting Decimal Point Position
(1) Using the keys, move the decimal point to the desired
position.
(2) Then, press the
key. The setting is changed accordingly and the
unit setting begins flashing.
To cancel the change, press the key. The setting item selection screen
also returns.
The decimal point moves sequentially by the keys as shown
below.
or
or
7.2 Setting Each Item