7-31
IM CW120-E
Making Settings
7
When Setting Unit Specifically
(1) After finishing changing the decimal point position setting, the unit setting
starts flashing to allow you to change it.
ENTER
ESC
MEAS/SET
DISP
Setting Unit
MEAS/SET key
Select the unit from Wh, kWh,
MWh, and GWh using the
UP/DOWN/LEFT/RIGHT keys.
ENTER key
UP/DOWN/LEFT/RIGHT keys
ESC key
(2) Using the keys, change the unit.
(3) Then, press the
key. The setting is changed accordingly and the
setting item selection screen returns.
To cancel the change, press the key. The setting item selection screen
also returns.
7.2 Setting Each Item
To Next Page
Loading...
