8-2
IM CW120-E
8.2 Switching Display Contents
Pressing one of the UP/DOWN/LEFT/RIGHT keys changes the display
contents in order. The sequence differs depending on the wiring method set.
For example, the sequence when the single-phase two-wire method is
chosen is shown below. Even for the unseen data items, the respective
calculations are performed internally.
Upper: Rms voltage
Lower: Rms current
Sequence of Display Contents Switching for Single-phase Two Wires
Measurement Screen
Measurement Screen
or
or
Measurement Screen
Upper: Power factor
Lower: Frequency
Measurement Screen
Upper: Electric energy
Lower: Elapsed time of integration
Upper: Active power
Lower: Reactive power
Using UP/DOWN/LEFT/RIGHT keys
To Next Page
Loading...
