10-18
IM 701210-06E
Setting the Phase Offset of Shift Computation
If you specified SHIFT in the equation, set the amount of phase shift.
36. Press the Phase shift soft key.
The phase shift setup dialog box appears.
37. Use the jog shuttle and SELECT to set the time or data points for shifting the
phase of each waveform. If the time base is set to internal clock (Int), set the
time for shifting the phase. If the time base is set to external clock (Ext), set the
number of data points for shifting the phase.
Executing the Computation
38. Press the Exec soft key.
DSP1 to DSP6 are optional.
If the time base is set to
internal clock
If the time base is set to external clock, the
setup menu used to set the number of data
points for shifting the phase appears.
10.5 User-Defined Computation (Optional)
To Next Page
Loading...
