19-23
IM 701210-06E
Specifications
19
19.12 Module Specifications
WARNING
• Do not apply input voltage exceeding the maximum input voltage, withstand
voltage, or allowable surge voltage.
• To prevent the possibility of electric shock, be sure to furnish protective earth
grounding of the DL750/DL750P.
• To prevent the possibility of electric shock, be sure to fasten the module screws.
• The module screws must be fastened for the module to function as a non-
isolation module. In addition, all electrical and mechanical protection functions
are activated only when the screws are fastened.
• The maximum input voltage of the module is valid only when all the screws are
fastened, and the protection path of the metal BNC is secured.
To Next Page
Loading...
