EasyManua.ls Logo

YOKOGAWA EJX530A - Page 59

YOKOGAWA EJX530A
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
<9. General Specications>
9-8
IM 01C25F01-01E
9.3 OptionalSpecications“◊”
Item Description Code
Factory Mutual (FM) FM Explosionproof
*1
Explosionproof for Class I, Division 1, Groups B, C and D
Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G
Hazardous(classied)locations,indoorsandoutdoors(NEMA4X)
FF1
FM Intrinsically safe
*1*2
Intrinsically Safe for Class I, Division 1, Groups A, B, C and D, Class II,
Division 1,Groups E, F and G and Class III, Division 1 Hazardous Locations.
Nonincendive for Class I, Division 2, Groups A, B, C and D, Class II,
Division 2, Groups F and G, Hazardous Locations.
FS1
Combined FF1 and FS1
*1*2
FU1
ATEX ATEX Flameproof
*1
II 2G, 2D Ex db IIC T6...T4 Gb, Ex tb IIIC T85°C Db
Special fastener: ClassA2-50(A4-50) or more
KF22
ATEX Intrinsically safe Ex ia
*1*2
II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85°C T100°C T120°C Db
KS21
Combined KF22, KS21 and ATEX Intrinsically safe Ex ic
*1*2
Ex ic: II 3G Ex ic IIC T4 Gc
KU22
Canadian Standards
Association (CSA)
CSA Explosionproof
*1
[For CSA C22.2]
Explosionproof for Class I, Division 1, Groups B, C and D
Dustignitionproof for Class II/III, Division 1, Groups E, F and G
[For CSA E60079]
Flameproof for Zone1, Ex d IIC T6...T4 Enclosure IP66/IP67
ProcessSealingCertication
DualSealCertiedbyCSAtotherequirementofANSI/ISA12.27.01
No additional sealing required
Primary seal failure annunciation: at the zero adjustment screw
CF1
CSA Intrinsically safe
*1*2
[For CSA C22.2]
Intrinsically safe for Class I, Division 1, Groups A, B, C and D, Class II,
Division 1, Groups E,F and G, Class III, Division 1
Nonincendive for Class I, Division 2, Groups A, B, C and D, Class II,
Division 2, Groups F and G, Class III, Division 1
[For CSA E60079]
Ex ia IIC T4, Ex nL IIC T4
ProcessSealingCertication
DualSealCertiedbyCSAtotherequirementofANSI/ISA12.27.01
No additional sealing required
Primary seal failure annunciation: at the zero adjustment screw
CS1
Combined CF1 and CS1
*1*2
CU1
IECEx IECExameproof*
1
Flameproof for Zone1, Ex d IIC T6...T4 Gb
Special fastener: ClassA2-50(A4-50) or more
SF2
IECExIntrinsicallysafeandameproof
*1*2
Intrinsically safe
Ex ia IIC T4 Ga, Ex ic IIC T4 Gc
Flameproof
Flameproof for Zone1, Ex d IIC T6...T4 Gb
Special fastener: ClassA2-50(A4-50) or more
SU21
Combination of Approval Combination of KU22, FU1 and CU1 V1U1
NEPSI NEPSI Flameproof and dust ignition proof
*1
Refer to IM 01C25A00-12E
(Printed English manual, attached
to the products upon shipment.)
NF21
NEPSI Flameproof
*1
NF2
NEPSI Intrinsically safe
*1*2
NS21
KOSHA KOSHA Flameproof
*1
Refer to IM 01C25A01-01KO
(Printed Korean manual, attached
to the products upon shipment.)
PF22
KOSHA Intrinsically safe
*1*2
PS21
INMETRO INMETRO Flameproof
*1
Refer to IM 01C25A11-01P-Y
(CD-ROM Portuguese manual,
attached to the products upon
shipment.)
UF1
INMETRO Intrinsically safe
*1*2
US1

Table of Contents

Related product manuals