YOKOGAWA FG420 - Top Menu

33
IM FG410-01EN
4.2.3 Topmenu
Sequence oscillation, arbitrary waveform editing, system settings, saving and recalling settings, and
other actions are done by selecting the desired item from the top menu.
a) Displaying the top menu
Press the
MENU
menu key to display the following top menu window.
MENU
OFFSET
FCTN
FREQ
AMPTD
The top menu window opens.
Select the desired menu item using the up/down arrow keys or the modify knob, and then
press the
ENTER
ENTER key to display the menu item setting screen.
With the top menu window open, the desired menu item can also be specified by inputting a number
using the
0
...
9
numeric keypad.
If the display contents are invisible for the backlight out, press on the
MENU
menu key for a while to
light up the backlight forcibly.
b) Actions possible using the top menu items
The menu items are displayed at the top left of each setting screen.
Settings and operations such as those described below can be done with the various menu items.
Oscillator
Almost all settings other than arbitrary waveform editing
and sequence oscillation can be set and manipulated. When
the power is applied, the Oscillator setting screen is always
displayed.
 Sequence
Sequence oscillation setting and manipulation can be done.

“6. USING SEQUENCE OSCILLATON” in the Application
Instruction Manual
 ARBedit
Arbitrary waveform editing can be done.

“2. CREATNG ARBITRARY WAVEFORMS” in the
Application Instruction Manual
Utility
Various settings and manipulations can be done.

p.43
 Storememory
The settings can be saved to the setting memory.

p.126
Recall memory
The settings can be called from the setting memory.

p.128
Menu item
4.2 Screen Configuration and Operation