YOKOGAWA FG420 - Page 49

35
IM FG410-01EN
5.
Press the ENTER key to close the
input field.
ENTER
If the CANCEL key is pressed instead of the
ENTER key, the value changed with the modify
knob is discarded and the status of step 1
(pre-change setting) is returned to.
b) Changingavaluewiththe
0
...
9
numerickeypad
1.
Select the desired item with the
arrow keys or the modify knob.
In the example on the left, the [Freq]
(frequency) field is selected.
Item selection
or
2.
Press a key of the numeric keypad.
The input field under the selected item
opens and the numeric value is input.
In the example on the left, “2” is input.
During numeric input, the left arrow
key serves as the delete key, and the
right arrow key as the zero input key.
789
456
123
0
.
Numeric input
3.
Press the ENTER key or the unit key
(soft key) to set the input value and
reflect it to the output. The input field
closes.
If the ENTER key is pressed, the
setting is performed in a unit without
the “k” or “m” prefix.
ENTER
or
If the CANCEL key is pressed instead of the
ENTER key, the input value is discarded and
the setting remains unchanged.
Check
During numeric input, the left arrow key serves as the delete key, and
the right arrow key as the zero input key.
The input field
has closed.
The frequency is
selected.
The current
frequency is
displayed.
The input field
opens and a value
is input.
The setting is
changed and the
input field closes.
4.3 Basic Settings and Operations